D-Link AirPremier N DAP-2360 User Manual Download Page 51

Page: 51 / 97

D-Link DAP-2360 User Manual

Section 3 - Configuration

Authentication Settings - Username/Password

Select the captive portal encryption type here.

Options to choose from are Passcode, Username/

Password, Remote RADIUS, LDAP and POP3. In this

section we’ll discuss the User/Password option.

Enter the restricted subnets here. Access to these

subnets will denied to guest accounts. Up to four

restricted subnet entries can be defined.

Enter the username for the new account here.

Enter the password for the new account here.

Select the group for the new account here. Options

to choose from are Manager and Guest. Guest

accounts will have limited access.

Encryption

Type:

Restricted

Subnets:

Username:

Password:

Group:

Summary of Contents for AirPremier N DAP-2360


































































































Search results

Summary of Contents for AirPremier N DAP-2360

Reviews:

Related manuals for AirPremier N DAP-2360

Brands by name

Popular brands

D-Link AirPremier N DAP-2360, User Manual

Search results

Summary of Contents for AirPremier N DAP-2360

Reviews:

Related manuals for AirPremier N DAP-2360

Brands by name

Popular brands