D-Link AirPremier N DAP-2360 User Manual Download Page 11

Page: 11 / 97

D-Link DAP-2360 User Manual

Section 2 - Installation

Hardware Overview

Power LED

This light will be solid green when the unit is powered on.

2.4 GHz LED

This light will be flickering green when the 2.4GHz frequency is in use.

LAN LED

This light will be flickering green when there is active LAN traffic.

Power Receptacle (*Note no longer used, replaced by PoE)

The supplied power adapter connects here.

Reset Button

A pinhole button located beside the Ethernet socket is used to reset the

system or restore the factory default settings.

Note:

After resetting the unit, you will still be able to access the data

on your hard drives.

LAN (PoE) Port

An Gigabit Ethernet port that connects the unit to a network. This port

can also be used to supply power to this unit using Power over Ethernet.

Summary of Contents for AirPremier N DAP-2360


































































































Search results

Summary of Contents for AirPremier N DAP-2360

Reviews:

Related manuals for AirPremier N DAP-2360

Brands by name

Popular brands

D-Link AirPremier N DAP-2360, User Manual

Search results

Summary of Contents for AirPremier N DAP-2360

Reviews:

Related manuals for AirPremier N DAP-2360

Brands by name

Popular brands