23
D-Link DAP-2360 User Manual
Section 3 - Configuration
Wireless Client mode
Mode:
Network Name
(SSID):
SSID Visibility:
Auto Channel
Selection:
Channel:
Channel Width:
Site Survey:
Authentication:
Enable:
MAC Source:
MAC Address:
Wireless Band:
Select
2.4GHz
from the drop-down menu.
Wireless Client
is selected from the drop-down menu.
Service Set Identifier (SSID) is the name designated for a specific
wireless local area network (WLAN). The SSID’s factory default
setting is
dlink
. The SSID can be easily changed to connect to an
existing wireless network.
This option is unavailable in
Wireless Client
mode.
Enabling this feature automatically selects the channel that
will provide the best wireless performance. This feature is not
supported in
Wireless Client
mode.
The channel used will be displayed, and matches the AP that the
DAP-2360 is connected to when set to
Wireless Client
mode.
Use the drop-down menu to choose
20 MHz
or
Auto 20/40
MHz
.
Click on the
Scan
button to search for available wireless
networks, then click on the available network that you want to
connect with.
Use the drop-down menu to choose
Open System
or
WPA-Personal
.
Select
Open System
to communicate the key across the
network.
Select
WPA-Personal
to secure your network using a password
and dynamic key changes. No RADIUS server is required.
Check to enable clone MAC. This feature will allow you to change
the MAC address of the access point to the MAC address of a
client.
Select the MAC source from the drop-down menu.
Enter the MAC address that you would like to assign to the
access point.
Summary of Contents for AirPremier N DAP-2360
Page 1: ......
