![background image](http://html.mh-extra.com/html/d-link/airpremier-dwl-7100ap/airpremier-dwl-7100ap_manual_78304036.webp)
36
Device Configuration>Wireless>IEEE802.11a
• SSID
: The Service Set (network)
Identifier of your wireless network.
• Channel
: Allows you to select
a channel. 52 is the default
setting.
• SSID Broadcast
: Allows you to
enable or disable the broadcasting
of the SSID to network clients.
• Super A
: Super A is a group
of performance enhancement
features that increase end user
application throughput in an
802.11a network. Super A is
backwards compatible with
standard 802.11a devices. For
ideal performance, all wireless
devices on the network should
be Super A capable. The modes
are listed below:
• Radio Wave
: Enable or disable the wireless functionality of the selected device(s).
• Data Rate
: A pulldown menu to select the maximum wireless signal rate for the selected
devices(s).
•
Beacon Interval (20~1000)
: Beacons are packets sent by an access point to synchronize
a network. Specify the beacon value for the selected device(s) here. The default value
of 100 is recommended.
•
DTIM (1~255)
: DTIM (Delivery Traffic Indication Message) is a countdown informing
clients of the next listening window for broadcast and multicast messages.
•
Fragment Length (256~2346)
: This sets the fragmentation threshold (specified in bytes).
Packets exceeding the value set here will be fragmented. The default is 2346.
•
RTS Length (256~2346)
: The RTS value should not be changed unless you encounter
inconsistent data flow. The default value is 2346.
•
Tx Power
: A pulldown menu for selecting the transmit power of the selected device(s).
Using the AP Manager (continued)
•
Auto Channel Scan
: Enable to scan for the least populated channel.