13
D-Link AirPremier AG DWL-AG530 uses the Configuration Utility as the
management software. The utility provides the user an easy interface to change
any settings related to the wireless adapter. After you have completed the
installation of the DWL-AG530 (refer to the Quick Installation Guide that came
with your purchase) whenever you start the computer, the Configuration Utility
starts automatically and the system tray icon is loaded in the toolbar (see
illustration below*.) Clicking on the utility icon will start the Configuration Utility.
Another way to start the Configuration Utility is to click on Start>Programs>D-
Link AirPremier > D-Link AirPremier Utility.
Select the Wireless Networks tab.
Uncheck the box in the properties window
that enables windows configuration.
Using the Configuration Utility
If you are using Windows XP, you can use either the Zero Configuration Utility
or the D-Link Configuration Utility.
If the icon does not display in the taskbar, then click on
this icon on your desktop to open.
To use the D-Link Configuration Utility with XP, right-click
on the wireless network icon in the taskbar in the lower
right-hand corner of your computer screen.
In the window that appears, select
View Available Wireless Networks
and click the Advanced button. The
screen at right will appear.
After you have done this, you can then use the D-Link
Configuration Utility with XP by clicking on the D-Link
Configuration Utility icon.
*Configuration Utility icon
in the system tray
TM
TM
TM
To access the WPA security features
of the DWL-AG530 you must install
the Aegis software (included on the
installation CD) before inserting the Adapter
into your laptop PC.
