18
Using the Configuration Menu (continued)
Advanced > Mode (continued)
Enter the
MAC address
to configure the
Wireless Client
and the
Wireless Bridge
modes
Wireless Client mode
Wireless Bridge mode
When using the DWL- in
Wire-
less Client
mode, you will enter the MAC
address of the Remote AP.
Find the
MAC address
of the DWL- that is acting as a
Remote Ac-
cess Point
or a
Remote Bridge
, by going to
Status > Device Info
in the con-
figuration utility of the remote DWL-. There you will find the MAC ad-
dress as shown above.
When using the DWL- in
Wireless Bridge
mode, you will enter
the MAC address of the Remote Bridge.
MAC Address
- Media Access Control Address
A unique hardware address that identifies a device on a network. It is assigned at
the factory and cannot be changed. Usually you will find this address on a sticker
on the device or packaging.