15
Using the Configuration Menu (continued)
Home > Wireless
Apply-
Click
Apply
to save the changes.
Keys 1-4-
Input up to 4 WEP keys; select the one you wish to use.
Hexadecimal
digits consist of the numbers 0-9 and the letters A-F
ASCII
(American Standard Code for Information Interchange) is a code for representing
English letters as numbers from 0-127
SSID-
Service Set Identifier (SSID) is the name designated for a specific wire-
less local area network (WLAN). The SSID’s factory default setting is
default.
The SSID can be easily changed to connect to an existing wire-
less network or to establish a new wireless network.
Channel-
6
is the default channel. All devices on the network must share the same
channel.
WEP-
Wired Equivalent Privacy (WEP) is a wireless security protocol for Wire-
less Local Area Networks (WLAN). WEP provides security by encrypt-
ing the data that is sent over the WLAN. Select
Enabled
or
Disabled.
Disabled
is the default setting.
(Note: If you enable encryption on the
DWL- make sure to also enable encryption on all the wireless
clients or wireless connection will not be established.)
WEP
Encryption-
Select the level of encryption desired: 64-bit,128-bit, 256-bit
Key Type-
Select
HEX
or
ASCII