D+H BDT 010-EO, Original Instructions Manual

Page: 17 / 32

16/32 17/32
BDT-010-EO BDT-010-EO 99.827.67 1.0/08/18 99.827.67 1.0/08/18
Content
6 mm
With parallel positioning of only 6 mm and
limited pressure differences, sufficient
air exchange rates are provided for
raising room air hygiene.
ca. 6 mm
Window is
closed and locked
Window is openend app. 6 mm
in the parallel position and locked
Window is wide open
(turn position)
English English
Natural ventilation with the BDT-010-EO
Controlled natural ventilation with the
BDT-010-EO fitting drive from D+H
Mechatronic and the activPilot Comfort
PADM fitting system from Winkhaus
• Automated, user-independent and energy-
efficient ventilation according to DIN 1946-6
• Reduction of ventilation heat losses and
resulting savings in heating costs
• Regulation of room air hygiene and effective
mould prevention
• Ventilation without any loss in security is
possible up to RC2
• A real alternative to ventilation systems
A strong need for fresh air, comfortable
temperatures and excellent room air hygiene is a
crucial aspect in increasing the sense of well being
within your own four walls. But how do you
ventilate properly?
Either we ventilate too much and lose heat energy
in the process or we ventilate too little and feel
tired and weary as a result.
Controlled, fully-automated ventilation through a
combination of the BDT fitting drive from D+H
Mechatronic and the activPilot Comfort PADM from
Winkhaus enables you to achieve an optimal
combination of sufficient ventilation and low
heating requirements! Whether in the bathroom,
kitchen or bedroom – the stale air is constantly
exchanged and odours and pollutants are removed
permanently as a result! It‘s guaranteed to remove
the problems of mould and poor room air hygiene.
- Drive for actuating the acticPilot Comfort PADM
parallel action turn fitting system from Winkhaus
- The locking unit is mounted in lieu of the window
handle
- Burglar and weather protection is kept
- EnOcean-redio interface for high operating
comfort
- Cost-effective and easy installation of batteryless
EnOcean operating buttons (no cable laying
necessary!)
- Operating voltage 24 V DC
- Useable for daily natural ventilation
- Locking direction at the drive adjustable
- Only for inside mounting
Intended use
Safety notes
Operating voltage 24 VDC!
Do not connect directly to the mains supply!
- Connection must be carried out by a certified
electrical technician
- Danger of crushing hands and fingers!
- Keep people away from the operating area of the
drive
- Keep children away from the control
- Use only in dry rooms
- Suitable for indoor mounting only.
- Use unmodified original D+H parts only
Observe enclosed red safety note!
WARNING
Read all safety warnings, instructions, illustrations
and specifications provided with this product.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
Declaration of Conformity
We declare under our sole responsibility that the
product described under “Technical Data” is in
conformity with the following directives:
2014/30/EU, 2014/35/EU, 2014/53/EU
Technical file at:
D+H Mechatronic AG, D-22949 Ammersbek
Dirk Dingfelder Maik Schmees
Member of the Board Authorized signatory, Technical Director
02.05.2018
Intended use.........................................................16
Declaration of Conformity .....................................16
Safety notes..........................................................16
Natural ventilation with the BDT-010-EO ...............17
Scope of supply ....................................................18
General survey .....................................................19
Mounting ........................................................20 - 21
Power supply SNT 1-U..........................................22
Connection.....................................................22 - 23
Control elements ..................................................24
Maintenance and cleaning ....................................24
Disposal ...............................................................24
Position indicator ..................................................25
Technical Data ......................................................25
Basic Settings.......................................................26
Pairing EnOcean button........................................27
Operation using the EnOcean button ....................28
Emergency unlocking ...........................................29
Dimensions ..........................................................32