CNC Z32 - Programming Guide (LATHES)
Depending on the programming of the NX, NZ, X and Z parameters, the machining may be external, internal, from
left to right or from right to left.
Generally:
Roughing passes are executed proceeding from the NZ position toward the Z position
The depth increments are executed proceeding from the NX position toward the X position
The following diagram depicts the different cases:
Z
X
NX, NZ
X,Z
NI
NL
X
Z
NI
NL
NX, NZ
X,Z
X
Z
NX, NZ
X,Z
NI
NL
NL
NI
Z
X
NX, NZ
X,Z
Radius correction:
If the radius correction is active (
J1
), the roughing area is modified according to the tool radius, as shown in the
following figure:
If the radius correction is active, the tool is always
maintained inside the trapezoidal area defined.
Warning!
In order to use the radius correction, the tool tip
orientation must be previously defined with the G150
function, before calling the macro.
.
87
Summary of Contents for CNC Z32 Florenz Series
Page 2: ......
