CNC Z32 - Programming Guide (LATHES)
Scale factor
The KP parameter defines the scale factor on the working plane.
On a lathe, KP applies the scale factor on the plane ZX.
Y
X
KP = 2
The scale factors are automatically applied after programming the
parameters KP and KT.
At Reset KP=1 KT=1
2.14.5
Other correction parameters
It is possible to define further parameters as additive and multiplicative factors of the programmed positions.
multiplicative factor on a single axis: KM {+axis name}
additive factor on a single axis: KD {+axis name}
Example:
KMX 1.2
(scale factor of 1.2 only on X axis)
KDZ 10
(additive factor of 10 only on Z axis)
The additive and multiplicative factors are automatically applied after programming the parameters KM.. and KD...
At reset all effects related to these parameters are canceled.
Warning: Unlike all other translation, rotation, mirroring and scale factors, the additive and multiplicative
parameters on a single axis cannot be used in programs containing circular interpolations.
28
Summary of Contents for CNC Z32 Florenz Series
Page 2: ......
