15
TESTING LAUNCHER
Testing the Launcher
1. Set Launcher (see p.14). Make sure Safety Pin
is out before launch.
2. Keep area immediately around Launcher clear
of people and objects.
3. On Manual-Release Launchers, give a short
quick pull on the pull cord. On Remote Launch-
ers, be sure the correct Launcher is selected on
the Selector Knob and push the ‘BIRD’ button
on the transmitter.
Testing the Beeper/Locator
1. Turn Remote Receiver ON.
2. Be sure the correct Launcher is selected on the
Selector Knob and push the ‘BEEPER’ button
on Transmitter.
3. The Beeper Horn should beep any time the but-
ton is pushed.
NOTE
- The Beeper Horn is very loud and should be
covered if tested in close proximity.
Testing the Remote Receiver Only
1. Leave Launcher in the ‘open’ position.
2. Turn Remote Receiver ON. If it is already ON,
the Power Button may have to be pushed
quickly to reset the Remote Receiver.
3. Be sure the correct Launcher is selected on the
Selector Knob and push the ‘BIRD’ button on
Transmitter. The Motor Arm should rotate away
from the Launcher.
