12
TURNING REMOTE RECEIVER ON/OFF
Turning Remote Receiver OFF
1. Push and hold the Power Button on the Remote
Receiver. The Red LED Light will light solidly for
about 2 seconds followed by one short flash while
holding button.
2. Release the Power Button after the one short flash.
The unit is now OFF.
NOTE
- The Remote Receiver will automatically go into
Power-Save Mode after 1 hour of inactivity (see p.17).
Turning Remote Receiver ON
1. Push and hold the Power Button on the
Remote Receiver. The Red LED Light
will light solidly for about 2 seconds
while holding button.
2. Release the Power Button when the Red LED light
goes off. The unit is now ON and the Red LED light
will now flash approximately every two seconds.
NOTE
- The Transmitter is in a permanent “sleep” state
and is only active when a button is pressed.
These directions are for the BL 505, BL 509, BL 705,
and BL 709. For safety, keep Launcher in the ‘open’
position when turning Remote Receiver ON/OFF.
Before using the Remote Launcher, install 9V battery
in Transmitter and Remote Receiver by removing Bat-
tery Cover to access battery compartment. Use only
Alkaline batteries from major brand name manufactur-
ers. Generic brands may not work with these units.
