D Devices D Endo Rotatory, User Manual

Page: 7 / 68

ENGLISH
7
2.2 Instructions for contra angle
2.2.1 The contra angle adopts precision gear transmission, and the
transmission ratio is 6:1.
disinfect contra angle with disinfectant of neutral PH value. After
under high temperature and high pressure (134°C, 2.0bar~2.3bar
(0.20MPa~0.23MPa)).
2.2.3 The contra angle can only be used cooperatively with this
device. Otherwise the contra angle will be damaged.
2.3 Installation and removal of contra angle.
2.3.1 Installation
Align any locating pin of the contra angle with the positioning slot
on the motor handpiece and push the contra angle horizontally. The
four locating pins on the contra angle are inserted into those four
positioning holes on the motor handpiece. A “click” sound indicates
that the installation is in place.
The contra angle can be rotated 360° freely.
The contra angle rotates 360° so that the OLED display can always
be viewed easily.
2.3.2 Removal
Pull out the contra angle horizontally when the motor handpiece
does not run.