8
Version 1.0
Setting the Dosing Plans
To set the dosing plan select the pump head you want to programme by tapping on it. This will open
the plan page for that pump head.
Tap on ‘Cycle time’ and choose if you want to set up the schedule dosing frequency ‘By Days’ or
‘Weekly’
‘By Days’ will set the pump to dose every ‘X’ days, e.g. every 3 days. This can be set from every 1 day
to a maximum of every 99 days.
‘Weekly’ will allow you to choose the days of the week that you want to dose, e.g. Monday,
Wednesday and Friday.
When you have chosen the frequency tap ‘Save’ in the top right hand corner.
To set the dosing volume tap on the ‘+’ button in the top right corner. Then set the name of the
dosing plan and the time period to dose. It is factory set from 00:00 to 23:59 so that the dosing
volume will be added throughout the full day, it can set to dose for a limited period e.g. between
10:00 and 18:00. Once the times have been set tap ‘Save’ in the top right corner.
Select the ‘Quick Add’ tab. Enter the total amount that you would like to dose during the period
selected in the previous step and how many times to split that dose. For example, if the ‘Total add’ is
set to 10ml and the ‘Add times’ to 24 the pump would automatically split a 10ml dose in to 24 smaller
doses throughout the set period.
The number of times the dose can be split will be determined by the overall time period set for the
plan and the total volume to be dosed.
By tapping on the Eye logo next to the save button a detailed plan preview will be shown based on
the ‘Add times’ and ‘Total add’ figures. This will show when the pump will run and how much it will
add on each dose.
From here set the Anti-chemical interference can also be set. This prevents two or more channels
dosing at the same time. The time set in here will delay the automatically calculated program for that
channel.
w
w
w
.th
ea
qu
ari
um
so
lu
tio
n.c
om