![background image](http://html1.mh-extra.com/html/d-cut/lx-200/lx-200_operation-manual_3077981003.webp)
3
SET UP
CUTTING AND C
Installation of the Cutter (1)
Install the cross bar to the
cutter base with provided bolt
as shown.
Warning:
Do not put your
fingers against the sharp edge
of the blade at any time.
Working Table
Install the working table as
shown.
Warning:
Do not put your
fingers against the sharp
edge of the blade at any
time.
Installation of the Cutter (2)
Insert the handle to the base
and
install the rear base to the
front base
with provided
screws as shown.
Warning:
Do not put your
fingers against the sharp edge
of the blade at any time.