4
CUTTING
Cutting (1)
Insert material between the
cutting blade and the base as
shown and hold the material
with the flooring holding bar ,
then push handle down to
complete a cut.
Warning:
Maintain control of
the handle. Do not allow
handle to slam back after
making a cut.
Cutting (2)
Install the 0-45° Attachment as
shown. Insert material and hold
the material with the flooring
holding bar , then push handle
down to complete a cut.
Warning:
Maintain control of
the handle. Do not allow
handle to slam back after
making a cut.
Cutting Preparation
Place the angle attachment
into the cutter head and push
it as much as you can to the
bottom. Change the cutting
angle 0
°
or 45
°
as needed.
Warning:
Do not put your
fingers against the sharp edge
of the blade at any time.
