4 of 15
WARNING! USE CAUTION WHEN HANDLING ACTUATOR CABLES AND
CONNECTIONS INSIDE THE ACM. THESE PRODUCTS OPERATE UNDER
EXTREMELY HIGH VOLTAGE. SERIOUS INJURY OR DEATH COULD
OCCUR IF HANDLED WHILE IN OPERATION.
The D-BOX 3250i Actuator System is designed to be installed into the armrest of qualified home theater
seating.
When properly installed, the system will give you a three (3) axis motion designed for home entertainment.
The seat will move you front to back (pitch), side to side (roll) and up and down (heave).
Each actuator has a piston that will go in and out of the cylinder, thus making the motion. At the end of
each piston there is a plastic pivot piece that will be in contact with the floor (or a floor protector and the
provided anti-skip cup). Under each cup there is a rubber pad protecting the floor and ensuring the
installation will remain in place when operating.
