10 of 15
5 Tests
5.1 Routing the Cables
Set the 3250i in its final position. Route the CAT5 and power cables from the back of the ACM (Actuator
Control Module) ensuring they do not interfere, go under or near any of the actuators.
Route the CAT5 cable to the motion controller.
Connect the CAT5 cable to the motion controller, and the power cable to an electrical outlet.
5.2 Series IV-BD Motion Controller
Turn on the power on the motion controller. After it has booted, push the red button twice to enter the
Demo mode.
The chair will cycle through test movements.
Please see the device user manual for further details regarding this application.
5.3 340C Motion Controller
Turn the power on the motion controller. After it has booted, the red light will switch amber. Press the
power button again and the motion controller will activate. Push the green button to access the main
menu. Use the bottom arrow to scroll down to “Demo”. Push the green button again to initiate the “Demo”
mode.
The chair will cycle through test movements.
