![background image](http://html1.mh-extra.com/html/d-a-s/ep-series/ep-series_user-manual_3057275008.webp)
8
REAR PANEL
A) Mains input
B) Analogue balanced audio inputs
Four XLR input connectors located at the rear panel allow
injecting signal to the different channels of the amplifier.
C) Amplifier outputs
Four Neutrik NL4 output connectors located at the rear
panel permit the connection of the amplier channels to
the speaker systems. The amplifier outputs are named CH
A, CH B, CH C and CH D.
NL4 connector for outputs B and D include 2 active
connecting pins, +/-1.
NL4 connectors for outputs A and C include 4 active
connecting pins, +/-1 and +/2. By doing this the user may
have all the four output channels connected to 2 cables.
When using channels in bridge mode the speaker
systems must be connected to CH A or CH C using the pins
+1/-2.
D) DIP Switches
different parameters of the amplifier can be configured at
the rear panel with the mini DIP switches:
EP series /
User’s Manual
A
B
200-240V
50-60Hz:2500W
C
D
E
Amp Gain Bridge mode
Peak limiters
Peak limiters mode
E) Analogue balanced audio outputs.
Two XLR output connectors located at the rear panel
allowing having a copy of inputs A & C.