26
Wall mounting bracket
AX-112-5
The
AX-112-5
is a wall mounting bracket
designed for various models (WLL=25kgf)
.
The
AX-112-5
bracket has been designed to
be wall mounted in the vertical position only. Any
other position is a safety hazard.
Wall plugs provided are to be used in brick
walls only. For other wall materials, source the
suitable wall plug before use.
DAS Audio Group
is not responsible for use
other than the recommended. Use only the screws
and wall plugs supplied on surfaces that will
provide sufficient support. Do not use on surfaces
such as plaster, and gypsum.
Contact a licensed rigger if there is any doubt.
Mounting instructions
1.- Mark the 6 holes on the wall using the template
provided on right-hand side of this page.
2.- Drill the six holes and insert the wall plugs.
3.- Set the bracket into position and tighten 5 of
the 6 hexagonal-headed screws.
4.- Affix an end of the cable to the bracket using
the sixth hexagonal-headed screw.
5.- Screw (F) to the enclosure using 4 hexagon
socket head cap screws and 4 Grower (lock)
washers.
6.- Lift the enclosure and slide it down so that (F)
fits into the bracket.
7.- Aim the enclosure as needed and proceed to
secure it by tightening screws (D) with the suitable
Allen (hex) wrench and tighten screw (E).
8.- Affix the free end of the cable to the hole in (F).
F
D
E
Manual del Usuario
/ altea series /
User’s Manual
