17
By default the state of the screen is the following:
As stated previously by pushing the encoder the
user can access to the following options in the
MENU:
Five factory settings (
live, dance, vocals, bboost,
monitor
) depending on the type of music/use have
With the encoder go to Preset Sub-menu and press
By scrolling down the encoder more options
appear:
1
1
1
1
1
C
L
2
2
2
2
2
live
live
live
live
live
off
off
off
off
off
0
0
0
0
0
0.0m
0.0m
0.0m
0.0m
0.0m
O
O
O
O
O
+ 0 dB
+ 0 dB
+ 2 dB
MAIN MENU
MAIN MENU
MAIN MENU
MAIN MENU
MAIN MENU
MAIN MENU
MAIN MENU
MAIN MENU
MAIN MENU
MAIN MENU
BACK
BACK
BACK
BACK
BACK
BACK
BACK
LOW: 0 dB
WIRELESS AUDIO
WIRELESS AUDIO
PRESET: Live
PRESET: Live
HIGH: 0 dB
MID: 0 dB
EXPANDER: off
OPTIONS
HPF: Off
HPF: Off
HPF: Off
HPF: Off
HPF: Off
HPF: Off
HPF: Off
Delay: 0.0m
BACK
INPUT
CLIP
LIMIT
Once the input source (s) have been connected to
levels.
For the two input channels (1 and 2), two
independent gain controls are available. Be careful
when setting the input volume and do not exceed
the maximum level shown at the meters: (input clip)
After having set the input volume values under
the maximum level, user has to adjust ouput
careful not to exceed the limit: (LIMIT shown)
After these two volume adjustments the screen
will show something like this (when having the input
sources ON):
live preset
PRESET:
Live >
PRESET:
<dance>
PRESET:
<vocals>
PRESET:
<bboost>
PRESET:
<monitor>
Note: to enter and select and option always push the
select
Back
in the screen and press the encoder or just
Live
Vocals
Dance
BBoost
Monitor
System presets
DISPLAY (except
ALTEA-718A
)
This icon shows
when Wireless Audio
is activated in
ALTEA-712A and
ALTEA-715A.
peak
meters
Exceeding
the limits may
cause speaker
failure!!
Exceeding
the limits may
cause speaker
failure!!
rms
meter
Manual del Usuario
/ altea series /
User’s Manual