Product User’s Manual -
MAKER-UNO
Not to forget the change of FTDI chip to CH340 IC, the low cost yet stable USB to UART IC.
Maker-UNO combines the simplicity of the UNO Op boot bootloader (which load program
faster), the stability of the CH340 and the R3 shield compa bility of the latest
Of course, we preserve the good feature of CT-UNO, the USB Micro B socket for program
loading and to power the board. This enable everyone to u lize the USB cable of Android
smart phone and power bank. Program can be loaded from your computer by u lizing your
Android phone USB cable. Select "Arduino/Genuino UNO" for the "Board" in Arduino IDE
and choose the correct COM port, you are ready to upload the code. If you do not have the
, please get it as it is sold separately.
Maker-UNO has all the amazing features Arduino UNO has to offer, 14 Digital I/O pins with 6
PWM pins, 6 Analog inputs, UART, SPI, external interrupts, not to forget the I
2
C too. The SDA,
SCL and IOREF pins which being broken out on UNO R3 are on MAKER-UNO too. We has also
populated the ISP header pins (SPI and power). With this, Maker-UNO will be compa ble
with all Arduino UNO shield.
Features:
●
SMD ATmega328P microcontroller(the same microcontroller on Arduino UNO) with
Op boot (UNO) Bootloader.
●
USB Programming facilitated by the CH340.
●
Input voltage: USB 5V, from computer, power bank or standard USB adapter.
●
500mA (maximum) 3.3V voltage regulator.
●
0-5V outputs with 3.3V compa ble inputs.
●
14 Digital I/O Pins (6 PWM outputs).
●
6 Analog Inputs.
●
ISP 6-pin Header.
●
32k Flash Memory.
●
16MHz Clock Speed.
●
R3 Shield Compa ble.
●
LED array for 5V, 3.3V, TX, RX and all digital pins.
●
On board programmable push bu on (pin 2, need to configure as INPUT_PULLUP).
●
On board piezo buzzer (pin 8).
●
U lize USB Micro-B socket.
●
PURPLE PCB
!
Created by
Cytron Technologies Sdn Bhd
– All Rights Reserved
3
