Emergency shutdown of Hot Lips
Tube Sealer
Switch off the power by pressing the power switch to the "
O" position.
The power switch is located at the rear of the instrument, see the illustration below.
Disconnect the power cord from the power outlet.
If an emergency situation occurs when clamping tubing, the clamping operation is
immediately interrupted if the
GO button is released.
Power failure
Power failure to...
Will result in...
Sterile Tube Fuser - Dry
during the welding
operation
The tubes may not be completely welded.
Hot Lips Tube Sealer
during the sealing
operation
The tubes may not be completely sealed.
Restart after emergency shutdown or
power failure
When power is restored after a power failure or emergency shutdown, perform the
actions below as required.
2 Safety instructions
2.3 Emergency procedures
Sterile Tube Fuser - Dry and Hot Lips Tube Sealer Operating Instructions 28964139 AG
25
