Part
Function
3
Automatic circuit breakers
Connect power supply
WARNING
ÄKTA flux s must always be connected to a grounded power outlet.
WARNING
Do not block access to the power switch and power cord. The
power switch must always be easy to access. The power cord with
plug must always be easy to disconnect.
To connect the power supply, follow the instructions below.
Step
Action
1
Connect the power cord to the instrument.
2
Connect the power cord to a grounded power outlet specified in
Built-in circuit breakers
All pumps, the operator touchscreen (the user interface), and the mixer are equipped
with automatic circuit breakers, which are located at the rear side of ÄKTA flux s.
RECIRC
PUMP
USER
INTERFACE
CU-960
MIXER
TRANSFER
PUMP
PERMEATE
PUMP
5 Installation
5.4 Set up the ÄKTA flux s
5.4.1 Power supply and USB connection
ÄKTA flux s Operating Instructions 29046893 AG
69
