Cyrus Stream Xa, User Instructions

Page: 14 / 25

Stream Xa User Instructions
12
Connecting to a network
When switched on, the Stream Xa logo and a progress bar
are displayed while the unit searches for a network.
Cabled networks
When available, a cabled network connection will always
take connection priority over a wireless connection. if a
cabled connection is detected, the Stream Xa will join the
network automatically*.
*If the Stream Xa does not join your network automatically,
refer to the troubleshooting section before proceeding.
When you have completed password entry, select the •
‘oK’ option from the list above.
The system will then restart. The Source Menu menu will be
displayed following successful connection.
displayed with signal strength indication.
NOTe: Stream Xa will only find a wireless network with SSiD
broadcast enabled.
turn the Rotary/push control to position the network •
you want to join next to the cursor.
press the Rotary/push control to select the network. •
If you select the wrong network, press the key to
return to the network list.
If the wireless network requires a security password, the
display will prompt for password entry.
Press the • or key repeatedly to switch character
set entry between -
Numeric entry •
Lower case alphabet •
upper case alphabet •
punctuation and other symbols •
oK (select this option when you have finished entering •
the password).
Space (select this option to enter a space in the •
password)
Delete (select this option to delete the last character •
you entered.
turn the Rotary/push control to change the character •
displayed.
the Source Menu will be
displayed (jump to the
next column).
Wireless networks
if no cabled network is
found, and the aerial is
connected, a list of the
wireless network names
(SSiDs) in range will be
press the Rotary/ •
Push control to add
each character to the
password displayed.
if no cabled network was
detected and there are
no wireless networks in
range, the Network error
menu will be displayed.
Select ‘use without network’ if you don’t require a •
network connection.
Without a network connection, Aux and USB inputs may
be used and the Stream Xa can be operated from the front
panel controls.
Network music, internet radio and remote control from the
Cadence app will only be available when the
Stream Xa
is
connected to a network.
Select ‘Wireless Wizard’ to search again. •
NOTe: If the Stream Xa does not list your wireless network,
refer to the troubleshooting section.
Network not found