Cyrus PSX-R
2
User Instructions
2
Power supply:
Connect the moulded IEC connector of the AC cord supplied
plugs into the power inlet
c
on the rear of the unit. The
mains fuse
b
is on the rear panel next to the power switch.
It must only be replaced as follows:
230V Products: T2Al/250V 20mm
115V Products: T2.5Al/250V 20mm
The mains supply requirement of your power supply is
marked on a label on the rear panel. Before connecting,
check that this voltage is the same as your mains supply.
230V Products: Voltage Range 220V-240V
115V Products: Voltage Range 110V-120V
If you move to an area with a different mains voltage,
contact your local Cyrus distributor to have your product
converted.
There are no user replaceable fuses in this unit.
Servicing:
Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous voltage
or other hazards. Refer all servicing to qualified service
personnel.
CONDITIONS REQUIRING SERVICE:
unplug this product
from the wall outlet and refer servicing to qualified service
personnel when:
When the power supply cord or plug is damaged.
•
If liquid has been spilled, or objects have fallen into the
•
product.
If the product has been exposed to rain or water.
•
If the product has been dropped or damaged in any
•
way.
If the product does not operate normally by following
•
the operating instructions. (Adjust only those controls
that are covered by the operating instructions. Improper
adjustment of other controls may result in damage
requiring extensive work by a qualified technician to
restore the product to its normal operation).
When the product exhibits a distinct change in
•
performance.
REPLACEMENT PARTS:
When replacement parts are
required, be sure the service technician has used
replacements specified by the manufacturer or have the
same characteristics as the original part. Unauthorised
substitutions may result in fire, electric shock, or other
hazards.
SAFETY CHECK:
Upon completion of any service or repairs
to this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.
Product service centres:
For product service or technical advice, contact only
authorised Cyrus service centres. Contact details for Cyrus
distributors may be found on the Cyrus website at www.
cyrusaudio.com.