Cyrus PSX-R2 User Instructions Download Page 3

Cyrus PSX-R

2

User Instructions

1

WARNING:

  To  reduce  the  risk  of  electrical  shock  do  not 

remove  any  unit  covers  or  panels.  There  are  no  user 

serviceable parts in this product.

WARNING:

  To  reduce  the  risk  of  electric  shock,  do  not 

expose this equipment to rain or moisture.

HEED WARNINGS: 

All warnings on the product and in the 

operating instructions should be adhered to. 

READ ALL THE INSTRUCTIONS:

 All the safety and operating 

instructions should be read before the product is operated.

RETAIN  INSTRUCTIONS: 

The  safety  and  operating 

instructions should be retained for future reference.

FOLLOW INSTRUCTIONS:

 All operating and use instructions 

should be followed.

CLEANING: 

Unplug  this  product  from  the  mains  before 

cleaning. do not use liquid or aerosol cleaners. use a damp 

cloth for cleaning.

WATER AND MOISTURE:

 do not use this product near water 

- for example, near a bath tub, wash bowl, kitchen sink, or 

laundry tub, in a wet basement; or near a swimming pool 

and the like. The product must not be exposed to dripping 

or splashing and no objects filled with liquids, such as vases, 

shall be placed on the product.

HEAT:

  The  product  should  be  situated  away  from  heat 

sources  such  as  radiators,  stoves,  or  any  other  products  

(including amplifiers) that produce heat.

VENTILATION:

  Slots  and  openings  in  the  cabinet  are 

provided  for  ventilation,  to  ensure  reliable  operation  of 

the product and to protect it from overheating and these 

openings  must  not  be  blocked  or  covered.    The  openings 

should never be blocked by placing the product on a bed, 

sofa,  rug  or  similar  surface.  This  product  should  not  be 

placed in a built-in installation such as a bookcase or rack 

unless proper ventilation is provided or the manufacturer’s 

instructions have been adhered to.

OBJECT OR LIQUID ENTRY:

 Never push objects of any kind 

into  this  product    through  openings  as  they  may  touch 

dangerous  voltage  points  or    short-out  parts  that  could 

result in a fire or electric shock.

ACCESSORIES:

  Do  not  place  this  product  on  an  unstable 

cart, stand, tripod, bracket, or table. The product may fall, 

causing serious injury to a child or adult, and serious damage 

to the product. Use only with a cart, stand, tripod, bracket 

or table recommended by the manufacturer, or sold with 

the  product.  Any  mounting  of  the  product  should  follow 

the manufacturer’s instructions, and should use a mounting 

accessory recommended by the manufacturer.

POWER  SOURCES:

  This  product  should  be  operated  only 

from  the  type  of  power  source  indicated  on  the  marking 

label. If you are not sure of the type of power supply to your 

home, consult your product dealer or local power company.  

For  products  intended  to  operate  from  battery  power,  or 

other  sources, refer to the operating instructions.

OVERLOADING: 

Never  overload  wall  outlets,  extension 

cords, or integral convenience receptacles. This can result in 

an increased risk of fire or electric shock.

POWER CORD PROTECTION:

 Power supply cords should be 

routed so that they are not likely to be walked on or pinched 

by  items  placed  upon  or  against  them,  paying  particular 

attention  to  cords  at  plugs,  convenience  receptacles,  and 

the point where they exit from the product.

NAKED FLAMES:

 No naked flame sources, such as candles, 

must be placed on this product.

LIGHTNING: 

For  added  protection  for  this  product  during 

a lightning storm, or when it is left unattended or unused 

for long periods of time, unplug it from the wall outlet and 

disconnect the antenna or cable system. This will prevent 

damage  to  the  product  due  to  lightning  and  power-line 

surges.

BATTERIES:

  Warning  :  Batteries  shall  not  be  exposed  to 

excessive heat such as sunshine, fire or the like.

CAUTION! POLARISED CONNECTOR (CANADA and USA): 

To  prevent  electrical  shock,  match  wide  blade  of  plug  to 

wide slot, fully insert. Do not alter or remove this plug if it 

does not fit your mains power socket. Have a suitable socket 

installed by a competent electrician.

ACCESS TO THE MAINS PLUG:

 The means to disconnect this 

product  from  the  mains  supply  is  the  mains  plug.  Ensure 

that the mains plug is accessible at all times.

IMPORTANT! REAd bEfORE OPERATINg ThIS EqUIPMENT!

CAUTION:

 The exclamation mark is to draw your 

attention  to  important  instructions  and  safety 

procedures in this manual. 

ATTENTION: 

The lightning flash warns you of the 

risk of electrical shock presented by components 

inside  this  product.    unauthorised  personnel 

must not open this unit. 

MOVING  THE  PRODUCT:

  A  product  and  cart 

combination should be moved with care. Sudden 

stops, excessive force, and uneven surfaces may 

cause the product and cart to overturn.

ATTACHMENTS:

 Do not use attachments not recommended 

by the product manufacturer as they may cause hazards.

Summary of Contents for PSX-R2











Reviews: