18
Classic PRE
User Instructions
Configuration
Through the setup menu you can customise your
preamplifier to best match your system.
To enter the menu system
•
Press the front panel SETUP key.
•
Turn the Rotary control to scroll through the options
available on the display.
•
Press the Rotary control to select the option displayed.
•
During the setup sequence, you can move to the next or
previous step by pressing the Input up or down buttons.
•
Press the SETUP key to exit setup and save any changed
settings. Note that the setup sequence will exit, saving
any changed settings after 10 seconds of inactivity or
after the last option ‘Trim input 11’ has been completed.
The setup menu options are shown here –
Name Input
1
AN
Choose a name for input
1 from the name list
AN
Choose a name for input
2 from the name list
AN
Choose a name for input
3 from the name list
AN
Choose a name for input
4 from the name list
AN
Choose a name for input
from the name list
PHONO
Choose a name for input
from the name list
DIG1
Choose a name for input
from the name list
DIG2
Choose a name for input
from the name list
DIG3
Choose a name for input
from the name list
DIG4
Set the sensitivity offset for input
1
AN
Set the sensitivity offset for input
2
AN
Set the sensitivity offset for input
3
AN
Set the sensitivity offset for input
4
AN
Set the sensitivity offset for input PHONO
Set the sensitivity offset for input DIG1
Set the sensitivity offset for input DIG2
Set the sensitivity offset for input DIG3
Set the sensitivity offset for input DIG4
Enable/Disable Auto-Standby
Name Input
2
AN
Name Input
3
AN
Name Input
4
AN
Name Input PHONO
Name Input DIG1
Name Input DIG2
Name Input DIG3
Name Input DIG4
Offset AN1
Offset AN2
Offset AN3
Offset AN4
Offset PHONO
Offset DIG1
Offset DIG2
Offset DIG3
Offset DIG4
Auto-Standby
Setup
Display Mode
Select large input, small input or large volume