background image

GUARANTEE

Cyrus aCA7

English

20

PRE-AMPLIFIER MAINTENANCE

There are no user serviceable parts in the Cyrus aCA7 so
do not remove any of the panels. After disconnecting the
mains power supply, the cabinet may be cleaned using a
slightly moistened chamois leather. DO NOT use cleaning
agents containing alcohol, spirits, ammonia or abrasives.

THE MISSION/CYRUS GROUP MANUFACTURES

 

Compact Disc Players

 

D-to-A Converters

 

Pre-amplifiers

 

Power amplifiers

 

Integrated amplifiers

 

Regulated Audio Power Supplies

 

Radio Tuners

 

Surround Sound Decoders

 

Multi-Room Audio Controllers

 

Loudspeakers

 

Subwoofers

 

Loudspeaker Stands

 

Loudspeaker Cables

 

Automotive Loudspeakers

 

Automotive Amplifiers

GUARANTEE

This guarantee only becomes effective if the guarantee card
enclosed is completed by the Dealer and the purchaser and
returned to MISSION or Distributor within 8 days of purchase.

This guarantee excludes:

i)

All damage caused through accident, misuse, wear and
tear, neglect or through incorrect installation, adjustment
or repair by unauthorised personnel.

ii)

Liability for damage or loss occurring in transit to or from
the purchaser.

Claims under this guarantee should be made through the Dealer
from whom the equipment was purchased or if not convenient,
through another authorised MISSION/CYRUS dealer.

MISSION shall not be liable for consequential damage, loss or
injury, arising from or in conjunction with this equipment.

The cost of return carriage shall be borne by the purchaser.

This guarantee is personal to the original Purchaser and is not
transferable.

If equipment is found on examination to comply with the
published specification, MISSION reserves the right to make a
charge for examination and for return carriage.

No Dealer or Distributor may vary the terms of this guarantee.

Any unauthorised servicing will result in loss of guarantee.

We strongly recommend that you retain the sales receipt for
your CYRUS equipment in case of any warranty claim.

The above conditions do not affect your statutory rights.

Summary of Contents for aCA7






















Reviews: