P E R I P H E R A L M A N U A L
August 31, 2015, S6E1Cx_MN710-00016-1v0-E
3
CONFIDENTIAL
Preface
Purpose of this manual and intended readers
This manual explains the functions, operations and serial programming of the flash memory of this series.
This manual is intended for engineers engaged in the actual development of products using this series.
Trademark
ARM and Cortex-M0+ are the trademarks of ARM Limited in the EU and other countries.
The company names and brand names herein are the trademarks or registered trademarks of their
respective owners.
Organization of this Manual
This manual consists of the following 3 chapters.
CHAPTER 1 Flash Memory
This chapter gives an overview of, and explains the structure, operation, and registers of the Main
Flash memory.
CHAPTER 2 Flash Security
The flash security feature provides possibilities to protect the content of the flash memory.
This chapter section describes the overview and operations of the flash security.
CHAPTER 3 Serial Programming Connection
This chapter explains the basic configuration for serial write to flash memory by using the Fujitsu
Semiconductor Serial Programmer.
Sample programs and development environment
Cypress offers sample programs free of charge for operating the peripheral functions of the FM0+ family.
Cypress also makes available descriptions of the development environment required for this series. Feel
free to use them to verify the operational specifications and usage of this Fujitsu Semiconductor
microcontroller.
Microcontroller support information:
http://www.spansion.com/support/microcontrollers/
Note:
−
Note that the sample programs are subject to change without notice. Since they are offered as a
way to demonstrate standard operations and usage, evaluate them sufficiently before running them
on your system.
Cypress assumes no responsibility for any damage that may occur as a result of using a sample
program.
