MB95560H/570H/580H Series MB2146-510-01-E Setup Guide, Doc. # 002-05587 Rev. *A
6
Preface
Damage
When turning the power on or off, follow the relevant procedure as de-
scribed in this document.
Before turning the power on, in particular, be sure to finish making all the
required connections. Furthermore, be sure to configure and use the
product by following the instructions given in this document.
Using the product incorrectly or inappropriately may cause a fault.
Damage
Always turn the power off before connecting or disconnecting any cables
from the product. When unplugging a cable, unplug the cable by holding
the connector part without pulling on the cable itself. Pulling the cable it-
self or bending it may expose or disconnect the cable core, resulting in a
fault.
Damage
Because the structure of the MCU socket does not allow an evaluation
MCU to be mounted in the incorrect orientation, be very careful of the ori-
entation of the evaluation MCU when mounting it.
Inserting the evaluation MCU in the wrong orientation may damage the
MCU, causing the MCU to become faulty.
Damage
Because the product has no casing, it is recommended that it be stored
in the original packaging. Transporting the product may cause a damage
or fault. Therefore, keep the packaging materials and use them when re-
shipping the product.
