Cypress EZ-BLE PRoC CYBLE-022001-00, Manual

Page: 36 / 40

CYBLE-022001-00
Document Number: 001-95662 Rev. *J Page 36 of 40
Document History Page
Document Title: CYBLE-022001-00 EZ-BLE™ PRoC™ Module
Document Number: 001-95662
Revision ECN
Orig. of
Change
Submission
Date
Description of Change
** 4662055 DSO 02/18/2015 Preliminary datasheet for CYBLE-022001-00 module.
*A 4679323 DSO 03/09/2015 Updated Overview :
Updated Module Description :
Updated Module Dimensions and Drawing :
Updated Figure 1 (Updated Module Pad Assignment).
Updated Recommended Host PCB Layout :
Updated Table 3 :
Updated title to “Module Solder Pad Connection Dimensions”.
Updated Table 4 :
Changed Pad 10 from NC to GND.
Updated Power Supply Connections and Recommended External Components :
Updated External Component Recommendation :
Updated Figure 7 (Changed Pad 10 from NC to GND).
Updated Figure 8 (Changed Pad 10 from NC to GND).
Updated Figure 9 (Changed Pad 10 from NC to GND).
*B 4710754 DSO 04/01/2015 Updated Document Title to read as “CYBLE-022001-00, EZ-BLE™ PRoC™
Module”.
Replaced terms “pre-certified” with “certified” and “pre-qualified” with “qualified”
respectively in all instances across the document.
Updated Overview :
Updated Module Description :
Changed GPIO number from “12” to “16”.
Added QDID and Declaration ID under “Bluetooth SIG 4.1 qualified item.
Updated Power Consumption
Updated Stop mode as “60 nA with XRES wakeup” under “Low Power mode
support” item.
Updated Functional Capabilities :
Change number of capacitive sensors supported from 9 to 13.
Updated Electrical Specification :
Updated Table 10 :
Updated details in “Details/Conditions” column of T
STOP
parameter to “XRES
wakeup”.
Updated Acronyms :
Added “QDID”.
*C 4812402 DSO 06/23/2015 Changed status from “Preliminary” to “Final”.
Updated General Description :
Updated Module Description :
Added identification numbers for FCC, IC, KC, and MIC regulatory agencies.
Updated Functional Capabilities :
Change number of capacitive sensors supported from 13 to 15.
Updated Power Supply Connections and Recommended External Components :
Updated Power Connections :
Updated description.
Updated Figure 9 (To final design schematic).
Updated Electrical Specification :
Update Table 9 :
Changed typical value of I
DD15
from 1.3 uA to 1.5uA.
Updated Ordering Information :
No change in part numbers.
Added Part Numbering Convention .
Added Packaging .
Updated Acronyms :
Added “SMT”.