Cypress CYW9P62S1-43438EVB-01, Manual, Page: 16 / 46

CYW9P62S1-43438EVB-01 PSoC 62S1 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28692 Rev. ** 16
Kit Operation
P9[6]
Extended Arduino
A14 (J2.14)
– –
P10[0] Arduino A0 (J2.1) – –
P10[1] Arduino A1 (J2.3) – –
P10[2] Arduino A2 (J2.5) – –
P10[3] Arduino A3 (J2.7) – –
P10[4] Arduino A4 (J2.9) – –
P10[5] Arduino A5 (J2.11) – –
P10[6] Potentiometer output
Extended Arduino A6
(J2.13)
Remove R51 to disconnect from
potentiometer.
P11[0] QSPI F-RAM CS – –
P11[1]
Red user LED
(LED9)
GPIO on non-Arduino
header (J24.4)
–
P11[2] QSPI Flash CS – –
P11[3:6] QSPI Flash IO[3:0] – –
P11[7] QSPI Flash CLK – –
P12[0]
Arduino header D11
(J3.4)
– –
P12[1]
Arduino header D12
(J3.5)
– –
P12[2]
Arduino header D13
(J3.6)
– –
P12[3]
Arduino header D10
(J3.3)
– –
P12[4]
GPIO on non-Arduino
header IO5 (J22.6)
– –
P12[5]
GPIO on non-Arduino
header IO6 (J22.7)
– –
P12[6] ECO Crystal XIN – –
P12[7] ECO Crystal XOUT – –
CYW43438 Pins
BT_UART_TXD
UART interface with
Host MCU (PSoC 6
MCU)
– –
BT_UART_RXD
UART interface with
Host MCU (PSoC 6
MCU)
– –
BT_UART_CTS
UART interface with
Host MCU (PSoC 6
MCU)
– –
Table 2-1. PSoC 62S1 Wi-Fi BT Pioneer Board Pinout (continued)
Pin
Primary On-board
Function
Secondary On-board
Function
Connection details