Document No.002-14949 Rev. *E
Page 111 of 113
PRELIMINARY
CYW43353
Document History Page
Document Title: CYW43353 Single-Chip 5G MAC/Baseband/Radio with Integrated Bluetooth 4.1 for Automotive and In-
dustrial Applications
Document Number: 002-14949
Revision
ECN
Orig. of
Change
Submission
Date
Description of Change
**
-
-
07/02/2013
43353-DS100-R
Initial release
*A
-
-
04/02/2014
43353-DS101-R
Updated:
•
The cover page and the general features .
•
By deleting the HSIC interface throughout, leaving pin and signal
names unchanged.
•
By changing the VBAT maximum voltage to 4.8V throughout.
•
“External Frequency Reference”.
•
Table 2: “Crystal Oscillator and External Clock — Requirements and
Performance” .
•
“Frequency Selection”.
•
Figure 10: “Startup Signaling Sequence”.
•
Figure 22: “UART Timing”.
•
“One-Time Programmable Memory”.
•
Table 20: “FCFBGA, WLBGA, and WLCSP Signal Descriptions,” on
page 117 by changing BT_VDDO to BT_VDDIO and adding a note
to the GPIO pin description.
•
Table 31: “I/O States”.
•
Table 34: “ESD Specifications”.
•
Table 35: “Recommended Operating Conditions and DC
Characteristics,” by changing C
IN
to C
OUT
.
•
Table 36: “Bluetooth Receiver RF Specifications” by deleting what
was footnote e, altering footnote b, and adding footnote b to one
additional place.
•
Table 37: “Bluetooth Transmitter RF Specifications”
•
“Introduction”.
•
RSSI accuracy in Table 42: “WLAN 2.4 GHz Receiver Performance
Specifications” and Table 44: “WLAN 5 GHz Receiver Performance
Specifications”.
•
Table 43: “WLAN 2.4 GHz Transmitter Performance Specifications”
and the note preceding it.
•
Table 45: “WLAN 5 GHz Transmitter Performance Specifications”
and the note preceding it.
•
Section 18: “Internal Regulator Electrical Specifications”
•
“WLAN Current Consumption” on page 175.
•
Figure 65: “SDIO Bus Output Timing (SDR Modes up to 100 MHz)”.
•
Figure 66: “SDIO Bus Output Timing (SDR Modes 100 MHz to 208
MHz)”.
