CY8CKIT-042-BLE-A Bluetooth® Low Energy (BLE) Pioneer Kit Guide, Doc. # 002-11468 Rev. *A
6
Safety Information
The CY8CKIT-042-BLE-A Bluetooth
®
Low Energy (BLE) Pioneer Kit is intended for development
purposes only. Users are advised to test and evaluate this kit in an RF development environment.
This kit is not a finished product and when assembled may not be resold or otherwise marketed
unless all required authorizations are first obtained. Contact
for details.
General Safety Instructions
ESD Protection
ESD can damage boards and associated components. Cypress recommends that the user perform
procedures only at an ESD workstation. If an ESD workstation is not available, use appropriate ESD
protection by wearing an antistatic wrist strap attached to the chassis ground (any unpainted metal
surface) on the board when handling parts.
Handling Boards
CY8CKIT-042-BLE-A boards are sensitive to ESD. Hold the board only by its edges. After removing
the board from its box, place it on a grounded, static-free surface. Use a conductive foam pad if
available. Do not slide the board over any surface.
CY8CKIT-042-BLE-A
boards
contain
ESD-sensitive
devices.
Electrostatic charges readily accumulate on the human body and any
equipment, and can discharge without detection. Permanent damage
may occur on devices subjected to high-energy discharges. Proper
ESD precautions are recommended to avoid performance degradation
or loss of functionality. Store unused CY8CKIT-042-BLE-A boards in
the protective shipping package.
End-of-Life/Product Recycling
The end-of-life cycle for this kit is five years from the date of
manufacture mentioned on the back of the box. Contact your nearest
recycler to discard the kit.
Summary of Contents for CY8CKIT-042-BLE
Page 8: ......
Page 9: ...Uncontrolled environment ...
