CY8CKIT-025 PSoC® Precision Analog Temperature Sensor Expansion Board Kit Guide, Doc. # 001-65791 Rev. *J
11
Introduction
1.2
PSoC Creator™
Cypress's PSoC Creator software is a state-of-the-art, easy-to-use integrated development
environment (IDE) that introduces a hardware and software design environment based on classic
schematic entry and revolutionary embedded design methodology.
With PSoC Creator, you can:
■
Automatically place and route select components and integrate simple glue logic normally
located in discrete muxes.
■
Trade off hardware and software design considerations, allowing you to focus on what matters
and getting to market faster.
PSoC Creator also enables you to tap into an entire tools ecosystem with integrated compiler tool
chains, RTOS solutions, and production programmers to support both PSoC 3 and PSoC 5LP
devices.
1.3
Getting Started
Follow the steps in the
Software Installation chapter on page 15
and
to understand the kit operation and
hardware. The
Example Projects chapter on page 30
explains the details of the firmware and
provides steps to run the projects.
1.4
Additional Learning Resources
Visit
for additional learning resources in the form of datasheets,
technical reference manual, and application notes.
1.4.1
Beginner Resources
AN54181 - PSoC 3 - Getting Started with a PSoC 3 Design Project
1.4.2
Engineers Looking for More
AN54460 - PSoC® 3, PSoC 4, and PSoC 5LP Interrupts
AN52705 - PSoC® 3 and PSoC 5LP - Getting Started with DMA
AN52701 - PSoC® 3 and PSoC 5LP - Getting Started with CAN (Controller Area Network)
AN54439 - PSoC® 3 and PSoC 5LP External Crystal Oscillators
AN52927 - PSoC® 3 and PSoC 5LP: Segment LCD Direct Drive
Cypress continually strives to provide the best support. Click
to view a growing list of
application notes for PSoC 3 and PSoC 5LP.
1.4.3
Learn from Peers
