10
HX3 Kits User Guide, Doc. #: 001-91203 Rev. *D
Introduction
1.2
HX3 Firmware Boot Modes
HX3 supports the following boot modes:
■
Custom firmware:
In this mode, HX3 boots from the firmware stored in an onboard I
2
C
EEPROM. This is the default factory setting for all three kits.
■
ROM firmware:
In this mode, HX3 boots from the internal ROM.
Refer to
to understand the jumper setting for these two modes.
CY4613
One each of the following items:
- CY4613 DVK board
- 12-V/3-A AC-DC power adapter with
four types of plugs
- USB 3.0 standard-A to micro-B cable
- USB 2.0 micro-B to micro-B
connector with ID pin support
- 5 jumpers
- Quick start guide
Table 1-2. CY4603, CY4609, and CY4613 Kit Contents
(continued)
Kit
Kit Contents
List of Kit Contents
Summary of Contents for CY4603
