Cypress CY4541 EZ-PD CCG4 Evaluation Kit, Manual

Page: 15 / 70

CY4541 EZ-PD CCG4 EVK Hardware
CY4541 EZ-
PD™ CCG4 Evaluation Kit Guide, Doc. No. 002-10353 Rev. *E
15
Figure 9. CCG EVK base board Block Diagram
Power
Input
Header
(J12)
Data MUX
(U5)
T
y
p
e
-C
R
e
c
e
p
ta
c
le
(
J
3
)
PMIC
(U3)
U
S
B
S
u
p
e
rS
p
e
e
d
P
o
rt
(J
2
)
D
is
p
la
y
P
o
rt
(J
4
)
CC
from
CCG4
Data
Lanes
(Tx/Rx)
Control from
CCG4
D+/D-
4
8
2
AUX Lines
2
USB SuperSpeed
Lines
DisplayPort
Lines
Hot Plug Detect
(HPD)
Voltage Selection
lines from
CCG4
VBUS
DC
Power
Jack
(J1)
VBUS
Provider
Control
VBUS
Consumer
Control
Power
Output
Header
(J7)
2
4.3.2 Features
Table 4-1 shows the features of the CCG EVK base board.
Table 4-1. CCG EVK Base Board Features
Feature Description
Power
Negotiated power from the DC power adapter controlled by PMIC and CCG4.
5 V from the Type-C connector (for dead battery support). For the dual Type-C port operation of this kit,
use a USB Type-C power adapter that supports a 9 V to 20 V power profile.
Note that the DC power adapter provided with the kit can support only up to 2.7A (at 24 V). This kit will
not work with 5 V DC power adapters.
CY4541 CCG4 daughter card
interface connector
Provides interface to connect the CY4541 CCG4 daughter card to the CCG EVK base board
Type-C Plug Orientation,
Detection and Alternate modes
I2C interface between CCG4 and the display multiplexer to select between SuperSpeed USB and 2-lane
or 4-lane DisplayPort.
Hot Plug Detect (HPD) for DisplayPort Alternate mode of operation.