Cypress CapSense CY3280-SmartSense, Kit Manual

Page: 6 / 30

6 CY3280-SmartSense CapSense Auto-Tuning Kit Guide, Doc. # 001-64672 Rev. *B
Introduction
1.3.3 PSoC Designer Installation Procedure
1. If PSoC Designer 5.0 or earlier is currently installed, uninstall it.
Click Start > Control Panel > Add or Remove Programs
2. Insert the software CD; using the menu, select Install PSoC Designer 5.1 .
Note Create the software CD by burning the downloaded CD ISO.
After installation, user guides and key documents are available in the \Documentation subdirectory
of the PSoC Designer installation directory.
The default location is:
C:\Program Files\Cypress\CY3280-SmartSense\1.0\CY3280-
SmartSense\Documentation
.
1.3.4 Factory Default Configuration
When shipped, the CY3280-SmartSense kit is loaded to run the SmartSense example project. The
LED is expected to toggle when the corresponding button is touched.
For a demonstration of the self-tuning capability of SmartSense algorithm, refer 3.2.5 Self Tuning
Demonstration on page 22 .
1.4 Reference Documents
■
CY8C20xx6A/H/AS CapSense
®
Design Guide
■
Getting Started with CapSense
®
1.4.1 Example Projects
■
Code Example Design Guide
1.4.2 Data Sheets
■
CY8C20x36A/46A/66A/96A
1.4.3 Technical Reference Manual
■
PSoC® CY8C20x66, CY8C20x66A, CY8C20x46/96, CY8C20x46A/96A, CY8C20x36,
CY8C20x36A