background image

EZ-USB Series 2100

USB firmware develop-
ment is faster since there
is less code to write. This

reduction in firmware allows the
design team to concentrate more
on software development for the
peripheral function.

Fewer 8051 MIPs are
dedicated to USB
processing. With the

EZ-USB family, as little as 10% of
8051 processing time is dedicated
to USB. That makes 90% of the
enhanced 8051 core’s processing
time available for peripheral
functions. Alternate solutions
dedicate more of their micro-
controller bandwidth to USB
processing.

The EZ-USB family
handles most low-level
USB overhead automati-

cally. Therefore, the learning
curve to understand all the
nuances of USB is reduced,
yielding fewer code errors and
faster product development.

Four Major Benefits of
Smart USB Core

The firmware code is
smaller and more
efficient than alternate

USB solutions. In the EZ-USB
family, the memory requirement
is reduced by a factor of two to
five times as compared to other
solutions. And, since less memory
is needed for firmware, board
size and system cost are reduced.

Automatically Handles Low-Level USB Overhead

Test Code Supports:

·

USB Chapter 9

·

String descriptors

·

USB suspend/resume

·

Remote wake-up

·

Bulk endpoint loopback

4

2

A USB hardware connection
is simpler than current
interface standards (ISA,
PCI, serial, parallel, and
SCSI). For example, there
are no IRQs or DMAs to set.
USB does not use direct
connections like RS232 or
EPP (Enhanced Parallel
Port). Instead, USB is a
packetized protocol similar
to telecommunication
standards such as X.25 or
frame relay. This makes
software development
complex.

3

The EZ-USB chip family reduces
the complexity of USB. It has a
predefined default descriptor
that causes it to function as a
generic USB device. Very little
code is required to operate the
EZ-USB chip when configured in
this default state. The default
descriptor can be replaced as the
peripheral manufacturer devel-
ops customized firmware.

Efficient EZ-USB Code

1

Firmware

File Type

EZ-USB Family

Alternate Solutions

Source

730 lines of C code

5445 lines of assembly code

Binary

< 1 Kbyte

> 5 Kbytes

Summary of Contents for AN2121SC

















Reviews: