34
Copyright (C) 2011-2012 Reserved by Cypress Semiconductor Corporation
GX3 EEPROM Programming User Guide
The Windows Production Test program has four tabs, namely: Test, EEPROM, Setting and
Log.
4-3-1.
Test Tab
The following is the user interface of “Test” tab of the Windows Production Test program.
Figure 12.
Windows Production Test Tool User Interface
Field #
Field Name
Description
1
Test Items
Displays all test items and test results.
2
Result
Displays final test result. “
O PASS
” means SUCCESS and “
X FAIL
”
means FAIL. The error message will be displayed in the Error
Message window if the test is failure.
3
Error Message
Displays the error messages when the test result is failure.
4
“START” button Starts running all Production Test items.
5
“Exit” button
Quit this program.
Table 10.
Windows Production Test Tool “Test” tab
Note:
Please double check following items before starting the Production Test.
1.
The IP address (e.g. 192.168.0.100) of GX3 Windows test driver of Test PC should be
configured to the same subnet as the IP address (e.g. 192.168.0.1) of Server PC.