manualshive.com logo in svg

Cypress Semiconductor GX3 EEPROM, Programming & User Manual, Page: 33 / 50

Share
Download
Cypress Semiconductor GX3 EEPROM Programming & User Manual Download Page 33

 

 

 

33 

Copyright (C) 2011-2012 Reserved by Cypress Semiconductor Corporation 

 GX3 EEPROM Programming User Guide 

 

The Windows Production Test program supports 6 test items. 

 

1.

 

PING Test 

This test will run the Ping Test with Server PC. 
 

2.

 

1000Mbps Full-Duplex Test 

This  test  will  let  network  auto-negotiates  at  1000Mbps  Full-Duplex,  and  then  starts 

sending packets to test server. Every packet received from test server will be compared. 

 

3.

 

100Mbps Full-Duplex Test 

This  test  will  let  network  auto-negotiates  at  100Mbps  Full-Duplex,  and  then  starts 

sending packets to test server. Every packet received from test server will be compared. 

 

4.

 

100Mbps Half-Duplex Test 

This  test  will  let  network  auto-negotiates  at  100Mbps  Half-Duplex,  and  then  starts 

sending packets to test server. Every packet received from test server will be compared. 

 

5.

 

10Mbps Full-Duplex Test 

This  test  will  let  network  auto-negotiates  at  10Mbps  Full-Duplex,  and  then  starts 

sending packets to test server. Every packet received from test server will be compared. 

 

6.

 

10Mbps Half-Duplex Test 

This  test  will  let  network  auto-negotiates  at  10Mbps  Half-Duplex,  and  then  starts 

sending packets to test server. Every packet received from test server will be compared. 

 

7.

 

EEPROM Program 

This test will program EEPROM content, and then read EEPROM to verify. 

 

After starting each of above test items, if the result of current test item is failed, the test will 
be stopped. 

 
 

Summary of Contents for GX3 EEPROM



















































Reviews:

No comments