CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28109 Rev. *E
8
1.
Introduction
Thank you for your interest in the CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit. The
PSoC 62S2 Wi-Fi BT Pioneer Kit enables you to evaluate and develop your applications using the
PSoC 62 Series MCU
(hereafter called “PSoC 6 MCU”) and CYW43012 WICED Wi-Fi/BT combo
device.
PSoC 6 MCU is Cypress’ latest, ultra-low-power PSoC specifically designed for wearables and IoT
products. PSoC 6 MCU is a true programmable embedded system-on-chip, integrating a 150-MHz
Arm
®
Cortex
®
-M4 as the primary application processor, a 100-MHz Arm Cortex-M0+ that supports
low-power operations, up to 2 MB Flash and 1 MB SRAM, Secure Digital Host Controller (SDHC)
supporting SD/SDIO/eMMC interfaces, CapSense
®
touch-sensing, and programmable analog and
digital peripherals that allow higher flexibility, in-field tuning of the design, and faster time-to-market.
The PSoC 6 BLE Pioneer Board offers compatibility with Arduino™ shields. The board features a
PSoC 6 MCU, and a CYW43012 Wi-Fi/Bluetooth combo module. Cypress CYW43012 is a 28-nm,
ultra-low-power device that supports single-stream, dual-band IEEE 802.11n-compliant Wi-Fi MAC/
baseband/radio and Bluetooth 5.0 BR/EDR/LE. The WLAN section supports SDIO interface to the
host MCU (PSoC 6 MCU), and the Bluetooth section supports high-speed 4-wire UART interface to
the host MCU. In addition, the board features an onboard programmer/debugger (KitProg3), a
512-Mbit Quad SPI NOR flash, a 4-Mbit Quad SPI F-RAM, a micro-B connector for USB device
interface, a 5-segment CapSense slider, two CapSense buttons, a microSD card holder, an RGB
LED, two user LEDs, one potentiometer, and two push buttons. The board supports operating
voltages from 1.8 V to 3.3 V for PSoC 6 MCU.
You can use ModusToolbox™ to develop and debug your PSoC 6 MCU projects.
ModusToolbox
software
is a set of tools that enable you to integrate Cypress devices into your existing development
methodology.
If you are new to PSoC 6 MCU and ModusToolbox IDE, refer to the application note
AN221774 -
Getting Started with PSoC 6 MCU
to help you familiarize with the PSoC 6 MCU and help you create
your own design using the ModusToolbox IDE.
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from