CY8CKIT-062S2-43012 PSoC 62S2 Wi-Fi BT Pioneer Kit Guide, Doc. # 002-28109 Rev. *E
10
Introduction
1.2
Getting Started
This guide will help you get acquainted with the PSoC 62S2 Wi-Fi BT Pioneer Kit:
■
The
Kit Operation chapter on page 19
describes the major features of the PSoC 62S2 Wi-Fi BT
Pioneer Kit and functionalities such as programming, debugging, and the USB-UART and USB-
I
2
C bridges.
■
The
Hardware chapter on page 30
provides a detailed hardware description, methods to use the
onboard NOR flash, kit schematics, and the bill of materials (BOM).
■
Application development using PSoC 62S2 Wi-Fi BT Pioneer Kit is supported in various
development ecosystems such as ModusToolbox and Mbed OS. For the latest software support
for this development kit including the different development ecosystems, refer to the
kit webpage
.
❐
ModusToolbox software is a free development ecosystem that includes the ModusToolbox
IDE. Using ModusToolbox IDE, you can enable and configure device resources, middleware
libraries, and program and debug the device. You can download the software from the
ModusToolbox home page
. See the ModusToolbox User Guide for additional information.
❐
Mbed OS: Visit
Cypress’ Mbed OS page
on instructions to develop applications on Cypress’
target board on the Mbed OS platform.
■
There are wide range of code examples to evaluate the PSoC 62S2 Wi-Fi BT Pioneer board.
These examples help you familiarize PSoC 6 MCU and create your own design. These examples
are available in various development ecosystems such as ModusToolbox IDE and Mbed OS.
Visit Cypress’ code example page to access examples for the following development
ecosystems:
❐
ModusToolbox based examples
❐
Mbed OS based examples
1.3
Board Details
The PSoC 62S2 Wi-Fi BT Pioneer Board that has the following features:
■ CY8CMOD-062S2-43012 carrier module that contains
❐
PSoC 6 MCU (CY8C624ABZI-S2D44)
❐
Murata 1LV ultra-small 2.4/5.0-GHz WLAN and Bluetooth functionality module based on
CYW43012
■
512-Mbit external Quad SPI NOR Flash that provides a fast, expandable memory for data and
code
■
4-Mbit Quad SPI ferroelectric random-access memory (F-RAM)
■
KitProg3 onboard SWD programmer/debugger with USB-UART and USB-I2C bridge functionality
■
CapSense touch-sensing slider (5 elements), two buttons, based on self-capacitance (CSD) and
mutual-capacitance (CSX) sensing
■
A micro-B connector for USB device interface for PSoC 6 MCU
■
1.8 V and 3.3 V operation of PSoC 6 MCU is supported
■
Two user LEDs, an RGB LED, two user buttons, and a reset button for PSoC 6 MCU
■
A potentiometer
■
One Mode selection button and one Status LED for KitProg3
■
A microSD Card holder
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from