manualshive.com logo in svg

Cypress Semiconductor CY7C1516KV18, Specification Sheet

Share
Download
Cypress Semiconductor CY7C1516KV18 Specification Sheet Download Page 30

Document Number: 001-00437 Rev. *E

Revised March 30, 2009

Page 30 of 30

QDR RAMs and Quad Data Rate RAMs comprise a new family of products developed by Cypress, IDT, NEC, Renesas, and Samsung. All product and company names mentioned in this document
are the trademarks of their respective holders.

CY7C1516KV18, CY7C1527KV18
CY7C1518KV18, CY7C1520KV18

© Cypress Semiconductor Corporation, 2005-2009. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use
of any circuitry other than circuitry embodied in a Cypress product. Nor does it convey or imply any license under patent or other rights. Cypress products are not warranted nor intended to be used
for medical, life support, life saving, critical control or safety applications, unless pursuant to an express written agreement with Cypress. Furthermore, Cypress does not authorize its products for use
as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress products in life-support
systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress against all charges. 

Any Source Code (software and/or firmware) is owned by Cypress Semiconductor Corporation (Cypress) and is protected by and subject to worldwide patent protection (United States and foreign),
United States copyright laws and international treaty provisions. Cypress hereby grants to licensee a personal, non-exclusive, non-transferable license to copy, use, modify, create derivative works of,
and compile the Cypress Source Code and derivative works for the sole purpose of creating custom software and or firmware in support of licensee product to be used only in conjunction with a Cypress
integrated circuit as specified in the applicable agreement. Any reproduction, modification, translation, compilation, or representation of this Source Code except as specified above is prohibited without
the express written permission of Cypress. 

Disclaimer: CYPRESS MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress reserves the right to make changes without further notice to the materials described herein. Cypress does not
assume any liability arising out of the application or use of any product or circuit described herein. Cypress does not authorize its products for use as critical components in life-support systems where
a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress’ product in a life-support systems application implies that the manufacturer
assumes all risk of such use and in doing so indemnifies Cypress against all charges. 

Use may be limited by and subject to the applicable Cypress software license agreement. 

Sales, Solutions, and Legal Information 

Worldwide Sales and Design Support

Cypress maintains a worldwide network of offices, solution centers, manufacturer’s representatives, and distributors. To find the office

closest to you, visit us at 

cypress.com/sales.

Products

PSoC

psoc.cypress.com

Clocks & Buffers

clocks.cypress.com

Wireless

wireless.cypress.com

Memories

memory.cypress.com

Image Sensors

image.cypress.com

PSoC Solutions

General

psoc.cypress.com/solutions

Low Power/Low Voltage

psoc.cypress.com/low-power

Precision Analog 

psoc.cypress.com/precision-analog

LCD Drive

psoc.cypress.com/lcd-drive

CAN 2.0b

psoc.cypress.com/can

USB

psoc.cypress.com/usb

Document History Page

Document Title: CY7C1516KV18/CY7C1527KV18/CY7C1518KV18/CY7C1520KV18, 72-Mbit DDR-II SRAM 2-Word

Burst Architecture

Document Number: 001-00437

Rev.

ECN No.

Orig. of 

Change

Submission 

Date

Description of Change

**

374703

SYT

See ECN

New Data Sheet

*A

1103864

VKN

See ECN

Updated I

DD 

spec 

Updated ordering information table

*B

1699246 VKN/AESA

See ECN

Converted from Advance Information to Preliminary

*C

1939726 VKN/AESA

See ECN

Changed PLL lock time from 1024 cycles to 20 

μ

s

Added footnote #19 related to I

DD

Corrected typo in the footnote #23

*D

2606839 VKN/PYRS

11/13/08

Changed JTAG ID [31:29] from 001 to 000,

Updated power up sequence waveform and its description,

Changed Ambient Temperature with Power Applied from “–10°C to +85°C” to

“–55°C to +125°C” in the “Maximum Ratings” on page 20,

Included Thermal Resistance values,

Changed the package size from 15 x 17 x 1.4 mm to 13 x 15 x 1.4 mm.

*E

2681899 VKN/PYRS

04/01/2009

Converted from preliminary to final

Added note on top of the Ordering Information table

Moved to external web

[+] Feedback 

Summary of Contents for CY7C1516KV18































Reviews:

No comments

Brands by name

Popular brands

Load more brands