
Cypher Technology Ltd V2.6 (03) December 2011
13
1. Boot up PUMA.
2. Press the {Menu} soft key to enter the menu.
3. Press the [Down Arrow] key until “
Install Software
” appears.
Either:
Press the [Disk] button to eject tray.
Place an upgrade disk on the tray and press [Disk] button once more to load the disk.
The disk will take a few seconds to be recognised. Please wait.
Or:
Plug in a USB drive to the rear panel of the PUMA. This should have the install file and
the data files copied to the root directory of the drive as described in the download
instructions.
5. Press the {Go} soft key to start the software upgrade. The installation progress will be
shown on the screen. DO NOT SWITCH OFF DURING THIS PROCESS OR THE
SYSTEM MAY BE UNUSABLE.
6. When complete the system will display “Installation complete” or it will restart the new
version of the program.
7. Switch off and reboot.
8. Check the Version number (displayed at boot up) is the same as that labelled on the
Install CD or DVD.
4.4.19
Adjust the Internal Time and Date
This function allows the internal real-time clock to be adjusted. This clock is used to time
and date stamp the Master.
The time and date is displayed in the top line of the display. E.g.
Adjust Time display
15:03:21 Tue Jan 9 2007
Sel <> Adj Up Dn Exit>
The hours number will flash and the [Up] and [Down] cursor keys can be used to adjust
the value. The [<] and [>] cursor keys can be used to select other fields. When the
correct time and date has been displayed, press the {Exit} soft key to exit back to the
Menu list.