CYP PUV-1H4HPL-AVLC, Operation Manual

Page: 30 / 46

30
COMMAND
Description and Parameters
set uart N1 parity N2
Set the parity of the specified RS-232 port.
Available values for
N1
:
A [Output A]
B [Output B]
C [Output C]
D [Output D]
E [Local RS-232]
Available values for
N2
:
0 [No parity]
1 [Odd parity]
2 [Even parity]
get uart N1 parity
Show the current parity setting of the specified RS-232 port.
Available values for N1 :
A [Output A]
B [Output B]
C [Output C]
D [Output D]
E [Local RS-232]
IR Commands
set ir N1 emitter N2
Enable or disable the IR output on the specified HDBaseT port’s receiver, or
on the local unit.
Available values for
N1
:
A [Output A’s receiver’s IR output]
B [Output B’s receiver’s IR output]
C [Output C’s receiver’s IR output]
D [Output D’s receiver’s IR output]
E [Local IR output]
Available values for N2 :
ON [Enable IR output]
OFF [Disable IR output]