CYP PUV-1602TXWP, Operation Manual

Page: 8 / 20

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
HDMI VGA
LINK VGA HDMI POWER
SERVICE
IN
IN
AUTO
ADJUST
IN
SEL
LAN
PUV-1602TXWP
AUDIO
IN
7
1 2 3 4 5 6
8 9 10 11
1 POWER LED:
This LED will illuminate to indicate the unit is on and
receiving power.
2 HDMI IN LED:
This LED will illuminate when HDMI is the selected
source.
3 VGA IN LED:
This LED will illuminate when VGA is the selected source.
4 LINK LED:
This LED will illuminate solid when both Transmitter and
Receiver are connected and communicating with each other properly.
5 IN SEL:
Press this button to switch between the available inputs. The
LED will illuminate to indicate which source is currently selected.
6
AUTO ADJUST: Press this button to optimise the positioning of the
picture (VGA sources only).
Note: Pressing and holding the Auto Adjust button for 5 seconds while the
HDMI input is selected will reset the unit to its factory defaults.
7 SERVICE:
This slot is reserved for firmware update use only.
8 HDMI IN:
Connect to HDMI source equipment such as a media player,
game console or set-top box.
9 VGA IN:
Connect to VGA source equipment such as a PC or laptop.