8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
Power
Link
Lite
CAT 5e /6 Out
DC 24V
IR2 Extender
RS232 In
IR1 Blaster
HDMI In
Rear
Front
2
3
1
5
4
6
7
8
1
RS232 In:
Plug the 3.5mm to D-Sub 9-pin female cable included in
the package and connect to a PC or laptop for RS-232 commands
transmission.
2
IR2 Extender:
Connect to the supplied IR Extender cable for IR signal
reception. Ensure that remote being used is within the direct line-of-
sight of the IR Extender.
3
IR1 Blaster:
Plug the IR Blaster included in the package for IR signal
sending from the Receiver side.
4
HDMI In:
Connect with source equipment such as DVD/Blu-ray player.
5
DC 24V:
Plug the 24V DC power supply into the unit and connect the
adaptor to an AC outlet. Only 1 side of device require power supply
when both Transmitter and Receiver obtain PoC function.
6
LINK LED:
This LED will illuminate when the devices are connected
with a CAT5e/6/7 cable from the Receiver side. When the data
transmission accrue with error the LED will be blinking.
7
Power LED:
This LED will illuminate when the devices are connected
with power supply.
8
CAT5e/6 Out:
Connect to the Receiver unit with a single CAT5e/6/7
cable for transmission of all data signals.