9
6.2 Receiver Front and Rear Panels
Power
Link
Lite
CAT 5e /6 In
IR1 Extender
RS232 Out
IR2 Blaster
HDMI Out
Rear
Front
DC 24V
6
7
5
8
2
3
4
1
1
DC 24V:
Plug the 24V DC power supply into the unit and connect the
adaptor to an AC outlet. Only 1 side of device require power supply
when both Transmitter and Receiver obtain PoC function.
2
LINK LED:
This LED will illuminate when the devices are connected
with a CAT5e/6/7 cable from the transmitter side. When the data
Transmission has an error the LED will blink.
3
Power LED:
This LED will illuminate when the device is connected
from the transmitter with power supply.
4
CAT5e/6 In:
Connect to the Transmitter unit with a single CAT5e/6/7
cable for transmission of all data signals.
5
RS232 Out:
Plug the 3.5mm to D-Sub 9-pin male cable included in the
package and connect to the device that is to be controlled by RS-232
commands
6
IR1 Extender:
Connect to the supplied IR Extender cable for IR signal
reception. Ensure that remote being used is within the direct line-of-
sight of the IR Extender.
7
IR2 Blaster:
Plug the IR Blaster included in the package for IR signal
sending from the Receiver side.
8
HDMI Out:
Connect to a HDMI equipped TV/monitor for display of the
HDMI input source signal.
